Name: Envy - Heat and Frost Protection
Brand: AgroBest
SKU: ENVY
Availability: InStock

Envy Heat and Frost Protection is used to protect plants against climatic Moisture Loss, Windburn, Sunburn & Frost.

Envy is a unique water emulsifiable polymer concentrate, which can be used on most crops, trees, vegetables, turf, ornamental and flower crops.

Active Ingredient: Carboxylated Hydrophilic Polymer

Click For Technical Info & Tips For Use

0 out of 5 (0 customers reviews)

Description

Envy Heat and Frost Protection

Active Ingredient: Carboxylated Hydrophilic Polymer

Envy Heat and Frost Protection is used to protect plants against climatic Moisture Loss, Windburn, Sunburn & Frost.

Envy provides frost protection and can increase frost tolerance by as much as 4°C

Envy provides heat protection and can reduce moisture loss through transpiration by up to 50%, reducing drought stress and irrigation.

Envy is a unique water emulsifiable polymer concentrate, which can be used on most crops, trees, vegetables, turf, ornamental and flower crops. When dry, Envy forms a semi-permeable, biodegradable film, which reduces transpiration and protects plants from climatic extremes.

Envy is non-toxic, pH neutral and biodegradable.

When dry, Envy Heat and Frost Protection forms a semi-permeable, biodegradable film, which reduces transpiration and protects plants from climatic extremes.

Envy will not impede photosynthesis and normal plant growth.

What does Envy Protect Plants From:

Excessive moisture loss.
Light to medium frost.
Sunburn.
Salt spray & Windburn.
Wilting in hot dry conditions.
Transplanting losses

What sort of plants can Envy Heat and Frost Protection be used on:

Apples	Vegetables
Citrus	Tomatoes
Fruit Trees	Peppers
Vegetables	Cucurbits
Nut Trees	Mangoes
Tree Plantations	All Crops
Cotton	Flowering Plants
Shrubs	Ornamentals
Palms	Lawn & Turf
Herbs

Application:

All anti-transparent spray applications must be applied for full coverage or used as a dip.
Envy should not be applied during flowering as it can create a barrier to pollination.
Envy should be applied 24 hours before adverse weather conditions. Apply when there is sufficient daylight time to dry, minimum 4 hours of sunlight. Foliar fertilizers and pesticides should be applied prior to an application of Envy or 2 weeks after application, as Envy may inhibit the absorption of some systemic products.
Avoid foliar application when ambient air temperature exceeds 35 degrees Celsius

Envy Heat and Frost Protection Pack Sizes: 1L, 5L, 20L (200L and 1000L)

Registrant: AgroBest Australia Pty Ltd.

Speciality Product Range

Share your thoughts!

0 out of 5 stars

0 reviews

Let us know what you think...

Leave a Review

What others are saying

There are no contributions yet.

Welcome back

Existing account holders please login below via Email, Google or Facebook or Click here to register your NEW FREE ACCOUNT.

Already Registered? Sign in with your email

Email Address *

Password *

Remember me

Forgot Password?

Continue with Google

Register for an account

Email address *

Password *

I have read & accept the privacy policy

Continue with Google

Secure Checkout

You can shop with Specialist Sales online store with confidence. We have partnered with PayPal, Master and Visa Card which is provided by Braintree. Braintree payment technology accepts credit cards and electronic payments safely and securely for our customers.

Braintree transactions are processed using the 3D Secure framework to ensure your sensitive customer information and credit card processing is safe and secure. Similarly, PayPal also provides comprehensive buyer protection for your peace of mind.

Your information is safe

Specialist Sales adheres to strict industry standards for payment processing, using industry leading security protection measures including 128-bit Secure Sockets Layer (SSL) technology for secure Internet Protocol (IP) transactions, and compliance with the Payment Card Industry Data Security Standard (PCI DSS).

Continue as a Guest

Features & Benefits

Frost Protection – Can increase frost tolerance by as much as 4°C.
Heat Protection – Can reduce moisture loss through transpiration by up to 50%, reducing drought stress and irrigation.
Will not impede photosynthesis and normal plant growth.
Non-toxic, pH neutral and biodegradable.

Directions Of Use

General Application Rates:

Application	Rate	Comment
Heat, Wind & Frost Ornamentals, Shrubs, Palms, Vegetables, Herbs, Lawn & Turf	50mL – 100mL per 1 Litre	Repeat every 2-4 Weeks. Re-apply to new growth for protection
Transplanting	50mL – 100mL per 1 Litre	To reduce transplant shock, spray or dip plant before transporting
Transporting	50mL per 1 Litre	Trim & spray trees 24 hours and pot plants at least 1 hour before transporting
Indoor Plants	50mL per 1 Litre	Reduce water consumption and gloss leaves

APPLICATION RATES:

Winter Protection –

To reduce winter damage caused by frost and cold desiccation

USE	RATE	APPLICATION
Apples	2.5L/100L	1st spray apply after petal fall and fruit set. 2nd spray 21 days later.
Citrus	1L/100L	2000L water/Ha in early Winter for frost protection from scarring and marking.
Fruit Trees	2L/100L	Early Spring for bud protection. Spray after petal fall.
Vegetables	2.5L/100L	Early Spring / Autumn to reduce winter damage.
Vines	5L/100L 2.5L/100L	Apply early spring to reduce winter damage, spray 5 days after bud burst. Additional spray 7 days later & follow up with applications 10 days later and again in 14 days to protect new growth.
Nut Trees	2.5L/100L	Early Autumn for frost protection. Repeat after fruit set and 30 days before harvest
Tree Plantations	2L/100L	Wet all foliage as protection against frosts and dry out for established plantings.
Cotton	2L/100L	Wet all foliage as protection against frost and dryout for established plantings.
Cotton Frost Protection	5-10L/100L	Minimum 100L/Ha spray. 1st application at 1st flower, 2nd application 21-28 days later.

Pre-harvest spray to improve the size, reduce pre-harvesting fruit drop, reduce sunburn incidence

USE	RATE	APPLICATION
Vegetables – Tomatoes, Peppers, Cucurbits etc	5L/100L	For sunburn protection on plants and fruit. Apply a minimum of 10L per Ha
Tropical & Sub Tropical Mangoes etc	5L/100L	To reduce drying and sunburn, improve storage, shipping quality & enhance colour & size.
All Crops	5L/100L or 10L/Ha Minimum	For reduction in sunburn incidence & fruit loss. Reduces moisture loss & water requirements.

To reduce transplanting shock and other uses

USE	RATE	APPLICATION
Transplants	5L-10L/100L	Water well 24 hours before transplant. Thoroughly saturate seedlings.
Bedding Plants	5L/100L	For frost and wilt stress spray before hardening off or transplanting. Spray before transportation to reduce damage
Flowering Plants	5L/100L	Spray for transportation protection. Reduced wilt and extended flowering time.
Indoor Foliage	5L/100L	Spray for extended maintenance and leaf gloss.
Turf Transplants	5L-10L/100L	Apply after watering and before lifting.
Deflasking	100mL/10L	Spray or dip plants when deflasking

Rates Are a General Guide Only. Before Opening, Carefully Read Envy – Heat and Frost Protection Directions for Use, Precautionary and Protection Statements, Storage and Disposal, Safety Directions and First Aid Instructions.

Questions and answers from customers

Does Envy Heat and Frost Protection affect insects?

Q Does Envy Heat and Frost Protection affect insects?
Asked by Apt on July 17, 2024 1:34 pm

Answered by the admin
Envy Heat and Frost Protection is non-toxic, pH neutral, and biodegradable and should not affect insects. Envy's directions of use' do not indicate any precautions relating to the safety of insects. However, they recommend that it should not be applied during flowering as it can create a barrier to pollination. Don't hesitate to contact the manufacturer, Agrobest, for further clarification at 1800 802 801.

I am considering using Envy as frost protection on Plantation trees that animals browse. Are there any problems with this use?

Q I am considering using Envy as frost protection on Plantation trees that animals browse. Are ther...... Read more
Asked by Ian on January 4, 2024 1:05 pm

Answered by the admin
Envy Heat and Frost Protection is non-toxic, pH neutral and biodegradable without withholding periods (WHP). Envy should not pose any problems if applied to plants where animals are present. If further clarification is required, please get in touch with the manufacturer, Agrobest, at 1800 802 801.

Can Envy - Heat and Frost Protection be used on bio dynamic situations?

Q Can Envy - Heat and Frost Protection be used on bio dynamic situations?
Asked by Anne on April 16, 2023 9:59 am

Answered by the admin
Envy Heat and Frost Protection label make no recommendations or claims for use in 'Bio-Dynamic' situations. We recommend contacting the manufacturer for further clarification AgroBest Australia Pty Ltd P. 1800 802 801 E. [email protected].

Disclaimer: This information and product advice is not intended to be advice or recommendations for any specific use or circumstance. You should seek specialist advice before using any product. Always follow the manufacturer’s guidelines. Specialist Sales liability is limited.

Host & Pest

Host	Pest
Host & Pest
Apples, Citrus, Fruit Trees, Vegetables, Nut Trees, Tree Plantations, Cotton, Shrubs, Palms, Herbs, Vegetables, Tomatoes, Peppers, Cucurbits, Mangoes, All Crops, Flowering Plants, Ornamentals, Lawn & Turf	Protection against Moisture Loss, Windburn, Sunburn & Frost.

Tips For Use

Application:

All anti-transparent spray applications must be applied for full coverage or used as a dip.
Envy should not be applied during flowering as it can create a barrier to pollination.
Envy should be applied 24 hours before adverse weather conditions. Apply when there is sufficient daylight time to dry, minimum 4 hours of sunlight. Foliar fertilizers and pesticides should be applied prior to an application of Envy or 2 weeks after application, as Envy may inhibit absorption of some systemic products.
Avoid foliar application when ambient air temperature exceeds 35 degrees Celsius.

Before Use:

Use only when water and air temperatures are above 5°C.
Ensure equipment is thoroughly rinsed.

Mixing:

Water must be of good quality or coagulation of Envy may occur.
A wetting agent should not be necessary.
Agral 600 or similar may be used if required.
Avoid foaming by adding Envy to the spray tank after the water has been added.

Spraying:

Apply in high volume with small droplet size recommended, spray to run off to achieve full coverage. All surfaces must have coverage.

Clean-Up:

Rinse well with water immediately.
Dried Envy may be removed from machinery with a diluted ammonia solution e.g. 2-5% w/v.
Ensure equipment is thoroughly rinsed after use.

Shelf Life:

Envy may be stored, undiluted, for up to five years in a sealed container away from heat and light.

Compatibility:

Do not combine with any other pesticide or fertilizer in the spray tank.

First Aid:

If poisoning occurs contact a doctor or Poisons Information Centre. Phone Australia 131 126.
For further information, refer to the Safety Data Sheet (SDS).