Name: Penatrol Spray Oil Adjuvant
Brand: Alphakem
SKU: PENATROL
Availability: InStock

Penatrol Spray Oil Adjuvant is an adjuvated spraying oil to improve the wetting and spreading of herbicides, insecticides and defoliants on plant surfaces.

Penatrol Spray Oil Adjuvant assists with droplet bounce, poor surface contact between active ingredient activity and leaf and low droplet survival on leaves that can reduce herbicide activity.

Active Ingredients Paraffinic Oil @ 582g/L, Nonyl Phenol Ethoxylate @ 120g/L & Alcohol Ethoxylate @ 120g/L.

Similar or comparable to Uptake Spraying Oil (Corteva) & In2 Spraying Oil (Conquest)

Click For Technical Info & Tips For Use

0 out of 5 (0 customers reviews)

Description

Penatrol Spray Oil Adjuvant

Active Ingredients Paraffinic Oil @ 582g/L, Nonyl Phenol Ethoxylate @ 120g/L & Alcohol Ethoxylate @ 120g/L.

Similar or comparable to Uptake Spraying Oil (Corteva) & In2 Spraying Oil (Conquest)

Penatrol Spray Oil Adjuvant is an adjuvated spraying oil to improve the wetting and spreading of herbicides, insecticides and defoliants on plant surfaces. Penatrol Spray Oil Adjuvant assists with droplet bounce, poor surface contact between active ingredient activity and leaf and low droplet survival on leaves that can reduce herbicide activity.

Many pesticides require the addition of Spray Oil or Adjuvant to improve effectiveness. Increased efficacy is achieved by improved spray retention on the target weed, or greater droplet spreading across the leaf surface and improved herbicide absorption into the leaf. Target grass and broadleaf weeds species differ in leaf structure, growth habit, size, surface and structure. Leaf surfaces can vary greatly, including smooth, waxy or hairy. Spray oils and Adjuvants help to reduce the impact of these barriers on pesticides entering the plant.

What are some of the herbicides Penatrol Spray Oil Adjuvant is compatible with;

Achieve Herbicide	Fusilade WG Herbicide	Topik 240EC Selective Herbicide
Atrazine	Fusion WG Herbicide	Tordon 242 Cereal Herbicide
Broadstrike Herbicide	Grazon DS Herbicide	Tordon 75-D Herbicide
Clethodim Herbicide	Haloxyfop	Triclopyr 600 Herbicide
Eclipse Herbicide	Lontrel 750SG Herbicide
Fluroxypyr 200 Herbicide	Targa Herbicide

If a Spray Oil or Adjuvant is not used with certain pesticides then the water in the spray solution which has a high surface tension forms discrete droplets on the leaf surface causing uneven pesticide coverage. To ensure the best pesticide performance, a spray droplet must wet the surface of the foliage, spread out and cover the leaf. Adjuvants reduce the surface tension of the spray droplet and the interfacial tension between that droplet and the leaf, improving herbicide uptake and translocation for better weed control.

How does Penatrol Spray Oil Adjuvant provide improved weed control and cost-effectiveness of the spray application;

Improves penetration of active ingredients by modifying target surface characteristics.
Improves the spreading of active ingredients to the target plant by reducing the surface tension of spray droplets.
Minimises any losses due to spray drift and/or evaporation.
Offers improved solution stability under low water rates.
Reduces the potential clogging or blockage of spray nozzles.

Penatrol Spray Oil Adjuvant Pack Sizes: 5L, 20L & 1000L

Registrant: Alphakem Global Pty Ltd (APVMA #: 60387)

Share your thoughts!

0 out of 5 stars

0 reviews

Let us know what you think...

Leave a Review

What others are saying

There are no contributions yet.

Features & Benefits

Contains the active ingredient Paraffinic Oil.
Compatible with a wide range of herbicides, cotton defoliants and insecticides.
Improves penetration of active ingredients by modifying target surface characteristics.
Improves the spreading of active ingredient to the target plant by reducing the surface tension of spray droplets.
Minimises any losses due to spray drift and/or evaporation.
Offers improved solution stability under low water rates.
Reduces the potential clogging or blockage of spray nozzles.

Directions Of Use

The general mixing rate is between 0.5-1L/100L

Situation: Spot and High Volume Spraying

Rate: Where specified use 500ml Penatrol per 100L water applying to point of run-off.

Situation: Broadacre cropping including fallow (except sugarcane)

Rate: Where specified use 500mL Penatrol per100L, applying a minimum of 250mL of Penatrol per hectare.

Situation: Sugarcane and cotton defoliation

Rate: Where specified use 1-Litre Penatrol per 100L, applying a minimum of 500mL of Penatrol per hectare.

Situation: Horticulture

Rate: Penatrol with Haloxyfop Herbicide for horticultural, use 500mL Penatrol per100L, applying a minimum of 250mL of Penatrol per hectare.

Rates are a general guide only. Before opening, carefully read Penatrol Spray Oil Adjuvant directions for use, precautionary and protection statements, storage and disposal, safety directions and first aid instructions.

Questions and answers from customers

There are no questions yet. Be the first to ask a question about this product.

Disclaimer: This information and product advice is not intended to be advice or recommendations for any specific use or circumstance. You should seek specialist advice before using any product. Always follow the manufacturer’s guidelines. Specialist Sales liability is limited.

Host & Pest

Host	Pest
Host & Pest
Pesticide/Herbicide Additive	Improves Performance

Tips For Use

Mixing:

Add water to the spray tank to 10cm above the level of agitation and ensure the agitation device is working vigorously. (There must be a minimum of 100L of water in the tank before any pesticide is added.)
If tank mixing, use the following general order for mixing partners. First, add water-dispersible granules (eg Eclipse), second, add flowable formulations (eg atrazine), third add emulsifiable concentrates (eg Fluroxypyr 200EC), fourth add water-soluble liquids (eg Clopyralid 300 Herbicide) and last Penatrol and other adjuvants.
Between the addition of each ingredient allow at least one minute to ensure thorough mixing before the new tank-mix partner is added.
Finally, add Penatrol. Continue filling the tank to the required volume maintaining agitation at all times.
Only mix sufficient spray solution for immediate use. Haloxyfop and other tank mixes should be applied immediately for best results

These are general mixing instructions. Always follow the mixing instructions of each ingredient in the tank mix. Ensure product compatibility. Recommendations on other product labels always take precedence over mixing instructions on this label.

Storage Of Spray Solution:

Agitate for 1 hour every 8 hours, and agitate for 1 hour before spraying out where spray solution is not applied within 8 hours of mixing.

Cleaning Spray Equipment:

The presence of the product(s) makes it essential for the spray equipment to be thoroughly cleaned between different applications.
To rinse and decontaminate spray equipment refer to the relevant product labels for instructions.
Recommended products include Boomblitz Pesticide Decontaminant

Storage:

Precaution: Explosion Warning:

Eempty containers may contain liquid and/or vapour which can be explosive if exposed to an ignition source at temperatures above 90°C.
Such conditions may occur during cutting or welding. Do not cut or weld these containers.
An explosion may cause injury or death.
Store in the closed, original container in a cool, well-ventilated area.
Do not store for prolonged periods in direct sunlight.
Do not store near food, feedstuffs, fertiliser or seed.
Do not re-use 5l, 20l, 110l containers.

Safety Directions:

Avoid inhalation or skin contact with spray mist.
When using with another chemical consult the safety directions of the companion product.
If poisoning occurs contact a doctor or Poisons Information Centre. Phone Australia 131 126.
For further information, refer to the Safety Data Sheet (SDS).