Cropro Buzzard Insecticide (Alpha Cypermethrin)

Tips For Use

Restraints: 

• Do not apply if rainfall is expected within 6 hours of application.
• Buzzard Insecticide is ineffective against synthetic pyrethroid-resistant Helicoverpa armigera larvae longer than 5mm.
• All Helicoverpa armigera in NSW and Qld should be treated as being resistant to synthetic pyrethroids.
• Refer to Resistance Management under General Instruction.
• This product is ineffective against pyrethroid-resistant Plutella xylostella

General Instructions:

• This product is a contact and residual insecticide.
• It can be used as a protective treatment when applied at regular intervals or as a knockdown treatment to control existing larvae.
• Best results will be obtained by spraying at egg hatch.
• Thorough coverage is essential to ensure adequate control.
• Apply during the cooler parts of the day.

The product can be applied in two ways:

1. Mixed with water OR
2. Mixed with oil-based bulking agents such as D-C-Ton Cotton Spray Oil or other compatible ULV products.

Mixing:

Low Volume and High volume applications by ground rig or when the product is applied with water as a carrier

• Add the required quantity of water & Buzzard to the spray tank and mix thoroughly. Maintain agitation during mixing and application.

Ultra-Low Volume (ULV) application by aircraft when the product is applied with oil-based bulking agents

• This product can be mixed with D-C-Tron Cotton Spray Oil or other compatible products (see Compatibility section).
• Add the mixing partner to the spray tank first, engage the agitation system and add the required amount of Cropro Buzzard Alpha Cypermethrin Insecticide direct to the spray tank.
• Do not mix with water to ensure there is no water in the spraying system.

Protection of Livestock:

• Dangerous to bees.
• Do not spray on any plants in flower while bees are foraging.
• This product is known to have a deterrent effect on foraging bees for a short period of time after spraying.
• The risk to bees is reduced by spraying in the early morning and late evening when bees are not foraging.

Protection of Wildlife, Fish , Crustaceans and Environment:

• Dangerous to fish and aquatic invertebrates such as yabbies.
• Do not contaminate streams, rivers or waterways with the chemical or the used container.
• Drift and run-off from treated areas may be hazardous to fish or crustaceans in adjacent sites.

Storage:

• Store in the closed, original container, in a dry, cool, well-ventilated area out of direct sunlight.

Safety Directions:

• Harmful if swallowed.
• Will irritate the eyes and skin. Facial skin contact may cause temporary facial numbness.
• Avoid contact with eyes and skin.
• Avoid inhaling vapour or spray mist.
• When preparing spray wear cotton overalls buttoned to the neck and wrist and a washable hat, elbow-length pvc gloves and a face shield or goggles. If product in eyes, wash it out immediately with water.
• After use and before eating, drinking or smoking, wash hands, arms and face thoroughly with soap and water.
• After each day’s use, wash gloves, face shield or goggles and contaminated clothing.

First Aid:

• If poisoning occurs, contact a doctor or poisons information centre .phone 131126.
• Additional information is listed on the Safety data sheet (SDS)

​This information and product advice is not intended to be advice or recommendations for any specific use or circumstance. You should seek specialist advice before using any product. Always follow the manufacturer’s guidelines. Specialist Sales liability is limited.​