Commander Dual Herbicide

Tips For Use

Stem Injection:

Rate: Mix one part Commander Dual with four parts water.

Stem Injection at or near ground level is recommended:

• Where soil types and substrata structure prevent vigorous root growth
• In ‘hard country’ (general poor growing conditions)
• Western Poplar box areas
• Areas where rainfall is less than 500mm per year
• Difficult to control species of wattles & Eucalypts (e.g. Stringy bark and sap bleeding types)

Commander Dual Herbicide: How many cuts per stem?

Refer to directions of use prior to use and for specific use rates.

Restraints:

• Do not treat trees with poor sap flow.
• Do not apply to plants which may be stressed (not actively growing) due to prolonged periods of extreme Cold, moisture stress (water-logged or drought affected) or previous herbicide treatment, as reduced levels of control may result.
• Do not apply close to or on areas containing roots of desirable vegetation, where treated soil may be washed to areas growing, (or to be planted with), desirable plants.
• Do not apply on sites where surface water from heavy rain can be expected to run off to areas containing or to be planted to susceptible crops or plants.
• Do not move soil, which has been sprayed, to areas where desirable plants are to be grown.
• Do not burn treated areas for 9 months after application or mechanically clear treated areas for at least 12 months after application.
• For high volume spraying, do not spray if rain is likely within 1 hour of if foliage is wet from rain or dew.

Storage:

• Store in the closed, original container in a cool, well-ventilated area.
• Do not store for prolonged periods in direct sunlight.
• Do not store near feed stuffs, fertilisers or seed, insecticides, fungicides or other pesticides.
• This container can be recycled if it is clean, dry, free of visible residues and has the drumMUSTER logo visible.

Spill and Leak Management:

• Do not touch or walk through spilled material.
• Wear a face-shield or goggles, overalls buttoned to the neck and wrist, chemical resistant gloves and footwear.
• Stop leak when safe to do so.
• Dam area and prevent entry into waterways and drains.
• Small spills/leaks: Absorb with material such as sand, soil or sawdust. Collect spilled product and place in sealable container for disposal.
• Spill residues may be cleaned using water and detergent. Contain and absorb wash water for disposal.
• Absorb and collect washing and place in the same sealable container for disposal.
• Dam the area of large spills and report them to the manufacturer

Safety Directions:

• May irritate the eyes.
• Avoid contact with eyes and skin.
• Do not inhale spray mist.
• Repeated exposure may cause allergic disorders. When opening the container, preparing the spray and using the product, wear cotton overalls buttoned to the neck and wrist, elbow-length PVC gloves, washable hat and face shield.
• After use and before eating, drinking or smoking, wash hands, arms and face thoroughly with soap and water.
• After each day’s use, wash gloves and face shield.

First Aid:

• If Poisoning occurs, contact a doctor or Poisons Information Centre. (Phone Australia: 13 1126) If in eyes, hold eyes open, flood with water for at least 15 minutes and see a doctor.
• For further information refer to Safety Data Sheet SDS.

​This information and product advice is not intended to be advice or recommendations for any specific use or circumstance. You should seek specialist advice before using any product. Always follow the manufacturer’s guidelines. Specialist Sales liability is limited.​